Join Workshops
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
What are the common problems of laser engravers?
laser engravers are not trouble-free. You may face some common problems such…
LaserPecker 4 Vs Laserpecker 3
When it comes to laser engraving, the LaserPecker 4 and LaserPecker 3 have some significant differences. The LaserPecker 4 is the newest model in the LaserPecker series, and it has many features that the LaserPecker 3 does not. The laserpecker 4 is faster, has larger engraving area, and can…
xTool F1 Ultra Laser Engraver- Is it worthy?
The xTool F1 Ultra is a 20W galvo fiber laser with 10,000…
xtool F1 Laser Engraver – Hands-on experience
We made a several trial operation with the xTool F1, a dual…
xTool S1 Review, Tests & Comparison with P2
The S1 laser engraver is in the hype, right? Well, just blew…
xTool P2 Review, tests & Compared to Glowforge
Do you know that xTool P2 is the fastest laser engraver now?…
How to clean Laser Tube of your CO2 laser cutter?
Cleaning the laser tube of a CO2 laser cutter is an important part of maintaining the health of the machine. Cleaning the laser tube will ensure that the laser cutter is functioning properly and at its maximum efficiency. Cleaning the tube requires special attention. Before beginning the cleaning process, make sure all safety precautions are taken and that all safety equipment is in place. Once the safety precautions are in place, follow these steps to ensure a thorough and safe cleaning of the laser tube. If you are…
Top 5 Things to Consider Before Laser Engraving a Steel Cup
Engraving steel cups would require a laser engraver along with a rotary…
Engraving Stanley Cup, Make your custom water bottle
Stanley cups and other Stanley water bottles are so popular because of…
xTool Creative Space (XCS) vs Lightburn
The xTool Creative Space (XCS) and Lightburn, both are laser engraving software.…
